Download
Design

Cut styles

Every item on the board gets a style. Pick it in the item's options under Style.

StyleWhat it doesUse it for
RaisedLowers the background around the item so it stands upBold names and logos
EngravedCuts the item down into the board with a flat bottomMost text and icons
Engraved with a V-bit (V-carve)When the bit in Wood & bit is a V-bit, Engraved becomes a V-carve: sharp corners, depth follows the widthClassic signs, fine serif letters
Cut throughCuts all the way through along the inside of the shape, leaving a holeStencils, hanging holes
PartCuts the item out along its outside, with holding tabs, as a loose pieceCoasters, tags, ornaments, several parts on one board

With Cut-out lettering chosen in Shape, every element is cut all the way through.

Depth

Each style has a Depth in millimeters. With a V-bit it reads Max depth (V-carve): the bit goes deeper where lines are wider, up to that limit. CarvCAM splits deep cuts into passes your bit can handle, based on the material.

Outline, fill and combine

Open Outline, fill & combine under an item for more:

OptionWhat it does
Thicker / thinnerGrows or shrinks the shape
Outline ringAdds a ring around the shape, with its own gap and width
Engraving fillSolid, or Outline + lines for a hatched texture, with line spacing and angle
Combine with othersNormal, Subtract (cuts this shape out of others) or Mask (keeps only what's inside)

Holding tabs

A Part or the sign's own outline leaves small bridges of wood so the piece doesn't move at the end. They show in amber on the board. Set how many and how tall in Prepare › Holding tabs. Switch Tab placement to Manual to drag them on the preview, or click the outline to add one; select a tab and press Delete to remove it. You saw them off after carving.

Which bit?

Raised, Engraved, Cut through and Part work with a 1/8″ flat end mill. V-carving needs a V-bit, such as the 60° V-bit.

Was this page helpful?