AltMill software: design, carve and control in one app
The AltMill is built for production speed. CarvCAM keeps the software side just as quick: one app from layout to the last pass, with the spindle under program control and your full bed available.
| Work area | 49 × 25 in, 49 × 49 in or 49.8 × 104 in |
| Controller | SLB-EXT (grblHAL) |
| Connection | USB-C or Ethernet |
| Spins the bit | 2.2 kW or 1.5 kW ER20 spindle with VFD |
Connect your AltMill in four checks
48 V power supply into the SLB-EXT, switch on, release the E-stop.
Spindle cable into the VFD; VFD data cable into the back of the controller, above the power switch.
VFD on first (2.2 kW needs a 240 V outlet), then the controller.
USB-C or Ethernet to your computer, then Connect: CarvCAM proves the Z moves and the spindle spins.

Already set for your AltMill
- 2×4, 4×4 and 4×8 work areas
- ER20 spindle speed range (7,500–24,000 RPM) through the VFD
- Feeds and speeds for Sienci bits on the AltMill
Step-by-step guides

Make a wooden sign
From blank board to finished sign on a LongMill or AltMill: design, pick a speed, set zero with the touch plate, carve and finish. With screenshots.
Read the guide
V-carve a house number plaque
A step-by-step guide to a V-carved house number plaque: layout with text on an arc, V-bit setup, depth passes and finishing for outdoor use.
Read the guide
Set work zero with a touch plate
Set X, Y and Z zero on a LongMill or AltMill with the touch plate: where the zero goes, how the probe works, and how to check it before carving.
Read the guideOther machines: LongMill MK3 · LongMill MK2 · Best CNC software for LongMill
From blank board to finished sign.
One app for your LongMill or AltMill.