Feature
Every Sienci Labs Bit, with Feeds for Your LongMill or AltMill
No tool database to type in. CarvCAM ships with the Sienci Labs bit catalog: tick the sets you own and every job uses those bits with the right numbers.
Download for Windows
Use online
Windows 10 and 11 · Mac · Linux · Raspberry Pi · Works offline · All downloads · See how it works

What it does
Your Sienci bits, already set up
- All eight Sienci sets, from the Starter End Mill Set to the AltMill Chamfer Set
- I have this set adds a whole set to My bits in one click
- Filter by use (engrave, relief, cut out, plastic, surface) and see the feeds for soft wood, hardwood, plastics or aluminum
- Each card says if the bit fits your router or spindle, or needs the 1/8″ collet
- Official Sienci feeds where Sienci publishes them; Estimated, from the same table, everywhere else
- Links to each bit's page at Sienci Labs
More features
Part of one workflow

No post-processor
“What is a post processor?” is one of the most asked questions on the Sienci forum. In CarvCAM you never need to know: there is nothing to pick, and the file is checked before it reaches the machine.
Learn more
V-carving
V-carving is what makes a sign look professionally cut: deep where the letter is wide, sharp in the corners. CarvCAM does it from the same text you typed.
Learn more
Sign design
Design where you carve. The preview shows the wood already cut, so what you see is what comes off the machine.
Learn moreFrom blank board to finished sign.
One app for your LongMill or AltMill.
Download for Windows
Use online
Windows 10 and 11 · Mac · Linux · Raspberry Pi · Works offline · All downloads · See how it works