# LongMill MK3 Software: Design, Carve and Control in One App | CarvCAM

> CarvCAM is desktop software for the LongMill MK3: design signs, get feeds tuned to your MK3 and AutoSpin, connect with a guided wiring check, and carve. Windows, Mac and Linux, works offline.

Source: https://carvcam.com/machines/longmill-mk3/

Current model · 30×30 and 48×30

# LongMill MK3 software: design, carve and control in one app

Your MK3 ships ready to cut. CarvCAM gets you from an idea to a finished sign on it without switching apps: the design, the toolpaths, the setup and the carve all happen in one window.

[Download for Windows](https://carvcam.com/download/windows)
[Use online](https://app.carvcam.com/)
Windows 10 and 11 · [Mac](https://carvcam.com/download/) · [Linux](https://carvcam.com/download/linux-appimage) · [Raspberry Pi](https://carvcam.com/download/raspberry-pi-deb) · Works offline · [All downloads](https://carvcam.com/download/) · [See how it works](https://carvcam.com/)

| Work area | 32 × 32 in or 49 × 32 in |

| Controller | SLB-LITE (grblHAL) |

| Connection | USB-C |

| Spins the bit | AutoSpin T1 router (Makita and spindle kits also supported) |

Wiring
### Connect your LongMill MK3 in four checks

- Power supply into the SLB-LITE, switch on, release the E-stop.

- AutoSpin T1: signal cable into the SPINDLE port (the phone-style jack), router in Spindle mode.

- USB-C from the controller straight into your computer.

- Connect in CarvCAM: it reads the controller, unlocks it and runs a 2 mm Z test and a 3 second spindle test.

[Image: Connect wizard for the LongMill MK3]

Ready on day one
## Already set for your LongMill MK3

- Work area and Z travel of the 30×30 and 48×30
- AutoSpin T1 speed range (10,000–30,000 RPM), set by the program
- Feeds and speeds for Sienci bits on your MK3

First projects
## Step-by-step guides

[Guide · 6 steps ### Make a wooden sign From blank board to finished sign on a LongMill or AltMill: design, pick a speed, set zero with the touch plate, carve and finish. With screenshots. Read the guide](https://carvcam.com/learn/make-a-wooden-sign-with-a-cnc/)[Guide · 5 steps ### V-carve a house number plaque A step-by-step guide to a V-carved house number plaque: layout with text on an arc, V-bit setup, depth passes and finishing for outdoor use. Read the guide](https://carvcam.com/learn/v-carve-a-house-number-plaque/)[Guide · 4 steps ### Set work zero with a touch plate Set X, Y and Z zero on a LongMill or AltMill with the touch plate: where the zero goes, how the probe works, and how to check it before carving. Read the guide](https://carvcam.com/learn/set-work-zero-with-a-touch-plate/)

Other machines: [AltMill](https://carvcam.com/machines/altmill/) · [LongMill MK2](https://carvcam.com/machines/longmill-mk2/) · [Best CNC software for LongMill](https://carvcam.com/best-cnc-software-for-longmill/)

## From blank board to finished sign.
One app for your LongMill or AltMill.

[Download for Windows](https://carvcam.com/download/windows)
[Use online](https://app.carvcam.com/)
Windows 10 and 11 · [Mac](https://carvcam.com/download/) · [Linux](https://carvcam.com/download/linux-appimage) · [Raspberry Pi](https://carvcam.com/download/raspberry-pi-deb) · Works offline · [All downloads](https://carvcam.com/download/) · [See how it works](https://carvcam.com/)
