# LongMill MK2 Software: Signs to G-code to Carving | CarvCAM

> One app for LongMill MK2 owners on the LongBoard or SuperLongBoard: design, toolpaths, simulation and machine control. Tells you the Makita dial setting for every cut.

Source: https://carvcam.com/machines/longmill-mk2/

Still supported · 12×30, 30×30 and 48×30

# LongMill MK2 software: design, carve and control in one app

Thousands of MK2s are still carving. CarvCAM supports both of its controllers and the classic Makita router, including the one thing a manual router needs: the dial number for each cut, shown before you start.

[Download for Windows](https://carvcam.com/download/windows)
[Use online](https://app.carvcam.com/)
Windows 10 and 11 · [Mac](https://carvcam.com/download/) · [Linux](https://carvcam.com/download/linux-appimage) · [Raspberry Pi](https://carvcam.com/download/raspberry-pi-deb) · Works offline · [All downloads](https://carvcam.com/download/) · [See how it works](https://carvcam.com/)

| Work area | up to 48 × 30 in |

| Controller | LongBoard (grbl) or SuperLongBoard (grblHAL) |

| Connection | USB (LongBoard), USB-C or Ethernet (SuperLongBoard) |

| Spins the bit | Makita RT0701C (AutoSpin and spindle kits also supported) |

Wiring
### Connect your LongMill MK2 in four checks

- 24 V power supply into the LongBoard or SuperLongBoard.

- Makita: plugged into the wall, switch off until CarvCAM asks for it.

- USB cable straight into your computer (SuperLongBoard: USB-C or Ethernet).

- Connect in CarvCAM and pick your controller; no homing sensors? You set zero by hand.

[Image: Connect wizard for the LongMill MK2]

Ready on day one
## Already set for your LongMill MK2

- 12×30, 30×30 and 48×30 work areas
- Makita dial number (1–6) for each operation
- Feeds and speeds for Sienci bits on your MK2

First projects
## Step-by-step guides

[Guide · 6 steps ### Make a wooden sign From blank board to finished sign on a LongMill or AltMill: design, pick a speed, set zero with the touch plate, carve and finish. With screenshots. Read the guide](https://carvcam.com/learn/make-a-wooden-sign-with-a-cnc/)[Guide · 5 steps ### V-carve a house number plaque A step-by-step guide to a V-carved house number plaque: layout with text on an arc, V-bit setup, depth passes and finishing for outdoor use. Read the guide](https://carvcam.com/learn/v-carve-a-house-number-plaque/)[Guide · 4 steps ### Set work zero with a touch plate Set X, Y and Z zero on a LongMill or AltMill with the touch plate: where the zero goes, how the probe works, and how to check it before carving. Read the guide](https://carvcam.com/learn/set-work-zero-with-a-touch-plate/)

Other machines: [LongMill MK3](https://carvcam.com/machines/longmill-mk3/) · [AltMill](https://carvcam.com/machines/altmill/) · [Best CNC software for LongMill](https://carvcam.com/best-cnc-software-for-longmill/)

## From blank board to finished sign.
One app for your LongMill or AltMill.

[Download for Windows](https://carvcam.com/download/windows)
[Use online](https://app.carvcam.com/)
Windows 10 and 11 · [Mac](https://carvcam.com/download/) · [Linux](https://carvcam.com/download/linux-appimage) · [Raspberry Pi](https://carvcam.com/download/raspberry-pi-deb) · Works offline · [All downloads](https://carvcam.com/download/) · [See how it works](https://carvcam.com/)
