# How to V-Carve a House Number Plaque on a CNC | CarvCAM

> A step-by-step guide to a V-carved house number plaque: layout with text on an arc, V-bit setup, depth passes and finishing for outdoor use.

Source: https://carvcam.com/learn/v-carve-a-house-number-plaque/

Guide · 5 steps · about 60 min

# How to V-Carve a House Number Plaque on a CNC

A step-by-step guide to a V-carved house number plaque: layout with text on an arc, V-bit setup, depth passes and finishing for outdoor use.

**You'll need:** 60° or 90° V-bit · Touch plate · Hardwood or cedar board · Exterior finish

-
### Lay out the plaque
Add the house number in a bold font and the street name on an arc. Frame it with an oval or a double frame.

[Image: Lay out the plaque in CarvCAM]

-
### Set the letters to V-carve
Pick a 60° or 90° V-bit in Wood & bit and set the text to Engraved. Set Max depth (V-carve): CarvCAM computes the depth from the stroke width.

[Image: Set the letters to V-carve in CarvCAM]

-
### Check the preview
Play the toolpath and look at the 3D view; fix any warning with one click.

[Image: Check the preview in CarvCAM]

-
### Zero on the board
Home, clamp, measure the V-bit with the touch plate and set zero.

[Image: Zero on the board in CarvCAM]

-
### Carve and finish
Carve, then seal with an exterior finish so the plaque lasts outdoors.

[Image: Carve and finish in CarvCAM]

## Related
[V-carving](https://carvcam.com/features/v-carve/) · [Sign design](https://carvcam.com/features/sign-design/) · [Simulation](https://carvcam.com/features/simulation/) · [LongMill MK3](https://carvcam.com/machines/longmill-mk3/) · [AltMill](https://carvcam.com/machines/altmill/) · [LongMill MK2](https://carvcam.com/machines/longmill-mk2/)

More guides: [Make a wooden sign](https://carvcam.com/learn/make-a-wooden-sign-with-a-cnc/) · [Set work zero with a touch plate](https://carvcam.com/learn/set-work-zero-with-a-touch-plate/) · [Connect your machine](https://carvcam.com/learn/connect-a-longmill-or-altmill/) · [Recover from an alarm](https://carvcam.com/learn/recover-from-a-cnc-alarm/) · [Make 6 name tags in one job](https://carvcam.com/learn/make-name-tags-on-a-cnc/) · [Cut a V-carve inlay coaster](https://carvcam.com/learn/cut-a-v-carve-inlay-coaster/) · [Install CarvCAM on a Mac](https://carvcam.com/learn/install-carvcam-on-a-mac/)

## From blank board to finished sign.
One app for your LongMill or AltMill.

[Download for Windows](https://carvcam.com/download/windows)
[Use online](https://app.carvcam.com/)
Windows 10 and 11 · [Mac](https://carvcam.com/download/) · [Linux](https://carvcam.com/download/linux-appimage) · [Raspberry Pi](https://carvcam.com/download/raspberry-pi-deb) · Works offline · [All downloads](https://carvcam.com/download/) · [See how it works](https://carvcam.com/)
