# How to Set Work Zero with a Touch Plate | CarvCAM

> Set X, Y and Z zero on a LongMill or AltMill with the touch plate: where the zero goes, how the probe works, and how to check it before carving.

Source: https://carvcam.com/learn/set-work-zero-with-a-touch-plate/

Guide · 4 steps · about 5 min

# How to Set Work Zero with a Touch Plate

Set X, Y and Z zero on a LongMill or AltMill with the touch plate: where the zero goes, how the probe works, and how to check it before carving.

**You'll need:** Touch plate with magnet clip · Your bit installed

-
### Find home first
Home the machine so every move afterwards is safe and inside the bed.

[Image: Find home first in CarvCAM]

-
### Clamp the board
CarvCAM shows the minimum board size on the bed. Clamp anywhere it fits.

[Image: Clamp the board in CarvCAM]

-
### Measure the bit
Clip the magnet to the bit, put the plate under it and click Measure height. The bit touches, records the height and lifts 5 mm.

[Image: Measure the bit in CarvCAM]

-
### Set X and Y
Click the board corner on screen to move there, fine-tune with the arrow keys, then Set zero here.

[Image: Set X and Y in CarvCAM]

## Related
[Homing and work zero](https://carvcam.com/features/touch-plate-zero/) · [Carve control](https://carvcam.com/features/carve-control/) · [LongMill MK3](https://carvcam.com/machines/longmill-mk3/) · [AltMill](https://carvcam.com/machines/altmill/) · [LongMill MK2](https://carvcam.com/machines/longmill-mk2/)

More guides: [Make a wooden sign](https://carvcam.com/learn/make-a-wooden-sign-with-a-cnc/) · [V-carve a house number plaque](https://carvcam.com/learn/v-carve-a-house-number-plaque/) · [Connect your machine](https://carvcam.com/learn/connect-a-longmill-or-altmill/) · [Recover from an alarm](https://carvcam.com/learn/recover-from-a-cnc-alarm/) · [Make 6 name tags in one job](https://carvcam.com/learn/make-name-tags-on-a-cnc/) · [Cut a V-carve inlay coaster](https://carvcam.com/learn/cut-a-v-carve-inlay-coaster/) · [Install CarvCAM on a Mac](https://carvcam.com/learn/install-carvcam-on-a-mac/)

## From blank board to finished sign.
One app for your LongMill or AltMill.

[Download for Windows](https://carvcam.com/download/windows)
[Use online](https://app.carvcam.com/)
Windows 10 and 11 · [Mac](https://carvcam.com/download/) · [Linux](https://carvcam.com/download/linux-appimage) · [Raspberry Pi](https://carvcam.com/download/raspberry-pi-deb) · Works offline · [All downloads](https://carvcam.com/download/) · [See how it works](https://carvcam.com/)
