# How to Make a Wooden Sign with a CNC (LongMill Step by Step) | CarvCAM

> From blank board to finished sign on a LongMill or AltMill: design, pick a speed, set zero with the touch plate, carve and finish. With screenshots.

Source: https://carvcam.com/learn/make-a-wooden-sign-with-a-cnc/

Guide · 6 steps · about 45 min

# How to Make a Wooden Sign with a CNC (LongMill Step by Step)

From blank board to finished sign on a LongMill or AltMill: design, pick a speed, set zero with the touch plate, carve and finish. With screenshots.

**You'll need:** LongMill or AltMill · 1/8 in flat end mill or 60° V-bit · Touch plate · A board, 3/4 in pine or MDF

-
### Design the sign
Type your text, pick a font made for carving, and add a frame from the element library. Set the letters to Engraved; with a V-bit picked in Wood & bit they come out V-carved.

[Image: Design the sign in CarvCAM]

-
### Pick a speed
In Prepare, choose Balanced. Check the board size, depth and estimated time in the summary.

[Image: Pick a speed in CarvCAM]

-
### Connect and home
Open Connect, follow the cable checks, then click Find home so the machine knows where it is.

[Image: Connect and home in CarvCAM]

-
### Clamp and zero
Clamp the board, measure the bit with the touch plate and set zero on the bottom-left corner.

[Image: Clamp and zero in CarvCAM]

-
### Carve
Tick the checklist and press Start. Pause with the space bar if you need to.

[Image: Carve in CarvCAM]

-
### Finish
Vacuum the dust, cut the tabs if you cut the sign out, and sand with 120 then 220 grit.

[Image: Finish in CarvCAM]

## Related
[V-carving](https://carvcam.com/features/v-carve/) · [Homing and work zero](https://carvcam.com/features/touch-plate-zero/) · [Carve control](https://carvcam.com/features/carve-control/) · [LongMill MK3](https://carvcam.com/machines/longmill-mk3/) · [AltMill](https://carvcam.com/machines/altmill/) · [LongMill MK2](https://carvcam.com/machines/longmill-mk2/)

More guides: [V-carve a house number plaque](https://carvcam.com/learn/v-carve-a-house-number-plaque/) · [Set work zero with a touch plate](https://carvcam.com/learn/set-work-zero-with-a-touch-plate/) · [Connect your machine](https://carvcam.com/learn/connect-a-longmill-or-altmill/) · [Recover from an alarm](https://carvcam.com/learn/recover-from-a-cnc-alarm/) · [Make 6 name tags in one job](https://carvcam.com/learn/make-name-tags-on-a-cnc/) · [Cut a V-carve inlay coaster](https://carvcam.com/learn/cut-a-v-carve-inlay-coaster/) · [Install CarvCAM on a Mac](https://carvcam.com/learn/install-carvcam-on-a-mac/)

## From blank board to finished sign.
One app for your LongMill or AltMill.

[Download for Windows](https://carvcam.com/download/windows)
[Use online](https://app.carvcam.com/)
Windows 10 and 11 · [Mac](https://carvcam.com/download/) · [Linux](https://carvcam.com/download/linux-appimage) · [Raspberry Pi](https://carvcam.com/download/raspberry-pi-deb) · Works offline · [All downloads](https://carvcam.com/download/) · [See how it works](https://carvcam.com/)
