# How to Install CarvCAM on a Mac (Apple Silicon or Intel) | CarvCAM

> Pick the right download for your Mac's chip, drag CarvCAM to Applications and get past the first-open warning with Open Anyway, on macOS 15 Sequoia and on older versions.

Source: https://carvcam.com/learn/install-carvcam-on-a-mac/

Guide · 6 steps · about 5 min

# How to Install CarvCAM on a Mac (Apple Silicon or Intel)

Pick the right download for your Mac's chip, drag CarvCAM to Applications and get past the first-open warning with Open Anyway, on macOS 15 Sequoia and on older versions.

**You'll need:** A Mac with Apple Silicon (M1 or newer) or an Intel processor · An administrator password for the first open

-
### Check your chip
Open the Apple menu › About This Mac. Chip: Apple M1, M2, M3 or newer means Apple Silicon. Processor: Intel means Intel.

-
### Download the right file
On the download page, click Apple Silicon (CarvCAM-Mac-arm64.dmg) or Intel (CarvCAM-Mac-x64.dmg).

-
### Drag to Applications
Open the .dmg and drag CarvCAM onto the Applications folder. Then eject the disk image.

-
### Open it the first time
Open CarvCAM from Applications. macOS says it can't check it for malicious software: click Done. Open System Settings › Privacy & Security, scroll down to the message about CarvCAM, click Open Anyway and confirm with your password.

-
### Older macOS
On macOS 14 Sonoma and earlier, you can instead Control-click (right-click) CarvCAM in Applications, choose Open, then Open again.

-
### Set up your workshop
After that, CarvCAM opens like any app. Pick your machine, what spins the bit and your bits.

[Image: Set up your workshop in CarvCAM]

## Related
[Connect wizard](https://carvcam.com/features/connect-wizard/) · [Runs on Mac](https://carvcam.com/features/mac/) · [LongMill MK3](https://carvcam.com/machines/longmill-mk3/) · [AltMill](https://carvcam.com/machines/altmill/) · [LongMill MK2](https://carvcam.com/machines/longmill-mk2/)

More guides: [Make a wooden sign](https://carvcam.com/learn/make-a-wooden-sign-with-a-cnc/) · [V-carve a house number plaque](https://carvcam.com/learn/v-carve-a-house-number-plaque/) · [Set work zero with a touch plate](https://carvcam.com/learn/set-work-zero-with-a-touch-plate/) · [Connect your machine](https://carvcam.com/learn/connect-a-longmill-or-altmill/) · [Recover from an alarm](https://carvcam.com/learn/recover-from-a-cnc-alarm/) · [Make 6 name tags in one job](https://carvcam.com/learn/make-name-tags-on-a-cnc/) · [Cut a V-carve inlay coaster](https://carvcam.com/learn/cut-a-v-carve-inlay-coaster/)

## From blank board to finished sign.
One app for your LongMill or AltMill.

[Download for Windows](https://carvcam.com/download/windows)
[Use online](https://app.carvcam.com/)
Windows 10 and 11 · [Mac](https://carvcam.com/download/) · [Linux](https://carvcam.com/download/linux-appimage) · [Raspberry Pi](https://carvcam.com/download/raspberry-pi-deb) · Works offline · [All downloads](https://carvcam.com/download/) · [See how it works](https://carvcam.com/)
