# How to Cut a V-Carve Inlay Coaster on a CNC (Step by Step) | CarvCAM

> Cut a heart inlay coaster with a 60° V-bit: the pocket in dark hardwood, the mirrored plug in a light wood, then glue, clamp and plane flush. Free example in CarvCAM.

Source: https://carvcam.com/learn/cut-a-v-carve-inlay-coaster/

Guide · 5 steps · about 90 min

# How to Cut a V-Carve Inlay Coaster on a CNC (Step by Step)

Cut a heart inlay coaster with a 60° V-bit: the pocket in dark hardwood, the mirrored plug in a light wood, then glue, clamp and plane flush. Free example in CarvCAM.

**You'll need:** 60° V-bit · 1/4 in flat end mill (clears the pocket bottom) · Walnut or another dark hardwood, 100 × 100 × 12 mm · Pine or another light wood for the plug, at least 70 × 65 × 12 mm · Wood glue and clamps · Hand plane, sander or surfacing bit

-
### Open the heart coaster
In First cuts, open Heart inlay coaster: a walnut coaster with a pine heart. It's free to cut. The Inlay card in the panel shows the pocket depth (3 mm), the glue gap (0.5 mm) and the plug depths.

[Image: Open the heart coaster in CarvCAM]

-
### Cut the pocket
Clamp the dark board, zero on the bottom-left corner and top face, and carve. The V-bit cuts the walls, then the flat bit clears the bottom. Don't move the board until the plug fits.

[Image: Cut the pocket in CarvCAM]

-
### Cut the plug
Click Open the plug job on the Inlay card. The heart is already mirrored. Zero on the light board like any job and carve: the V-bit starts 2.5 mm deep at the edge of the heart and lowers the rest of the board.

[Image: Cut the plug in CarvCAM]

-
### Glue and clamp
Dry-fit first: the walls should touch before the plug bottoms out. Brush glue on the walls, flip the plug board into the pocket and clamp. The 0.5 mm gap at the bottom holds the extra glue.

[Image: Glue and clamp in CarvCAM]

-
### Cut off and flatten
When the glue is dry, saw the plug board off in the 2 mm gap between the boards, then plane, sand or surface the top flush.

[Image: Cut off and flatten in CarvCAM]

## Related
[V-carving](https://carvcam.com/features/v-carve/) · [Feeds and speeds](https://carvcam.com/features/feeds-and-speeds/) · [V-carve inlays](https://carvcam.com/features/v-carve-inlay/) · [LongMill MK3](https://carvcam.com/machines/longmill-mk3/) · [AltMill](https://carvcam.com/machines/altmill/) · [LongMill MK2](https://carvcam.com/machines/longmill-mk2/)

More guides: [Make a wooden sign](https://carvcam.com/learn/make-a-wooden-sign-with-a-cnc/) · [V-carve a house number plaque](https://carvcam.com/learn/v-carve-a-house-number-plaque/) · [Set work zero with a touch plate](https://carvcam.com/learn/set-work-zero-with-a-touch-plate/) · [Connect your machine](https://carvcam.com/learn/connect-a-longmill-or-altmill/) · [Recover from an alarm](https://carvcam.com/learn/recover-from-a-cnc-alarm/) · [Make 6 name tags in one job](https://carvcam.com/learn/make-name-tags-on-a-cnc/) · [Install CarvCAM on a Mac](https://carvcam.com/learn/install-carvcam-on-a-mac/)

## From blank board to finished sign.
One app for your LongMill or AltMill.

[Download for Windows](https://carvcam.com/download/windows)
[Use online](https://app.carvcam.com/)
Windows 10 and 11 · [Mac](https://carvcam.com/download/) · [Linux](https://carvcam.com/download/linux-appimage) · [Raspberry Pi](https://carvcam.com/download/raspberry-pi-deb) · Works offline · [All downloads](https://carvcam.com/download/) · [See how it works](https://carvcam.com/)
