# How to Connect a LongMill or AltMill to Your Computer | CarvCAM

> Where each cable goes on the LongBoard, SuperLongBoard, SLB-EXT and SLB-LITE, and how to prove the connection works before your first carve.

Source: https://carvcam.com/learn/connect-a-longmill-or-altmill/

Guide · 5 steps · about 10 min

# How to Connect a LongMill or AltMill to Your Computer

Where each cable goes on the LongBoard, SuperLongBoard, SLB-EXT and SLB-LITE, and how to prove the connection works before your first carve.

**You'll need:** Your controller and power supply · USB cable that carries data (or Ethernet) · Router or spindle

-
### Power the controller
Switch off, plug the power supply in (red on top), plug into the wall, switch on.

[Image: Power the controller in CarvCAM]

-
### Release the E-stop
Press the red button and twist it clockwise until it pops up and lights.

[Image: Release the E-stop in CarvCAM]

-
### Connect the router or spindle
AutoSpin: signal cable into the SPINDLE port. Spindle kit: VFD data cable into the back of the controller. Makita: wall outlet only.

[Image: Connect the router or spindle in CarvCAM]

-
### Plug in USB or Ethernet
Use the cable that came with the machine, straight into the computer. Ethernet: controller at 192.168.5.1.

[Image: Plug in USB or Ethernet in CarvCAM]

-
### Connect and test
Pick the controller in the list, press Connect, unlock, then run the 2 mm Z test and the spindle test.

[Image: Connect and test in CarvCAM]

## Related
[Connect wizard](https://carvcam.com/features/connect-wizard/) · [LongMill MK3](https://carvcam.com/machines/longmill-mk3/) · [AltMill](https://carvcam.com/machines/altmill/) · [LongMill MK2](https://carvcam.com/machines/longmill-mk2/)

More guides: [Make a wooden sign](https://carvcam.com/learn/make-a-wooden-sign-with-a-cnc/) · [V-carve a house number plaque](https://carvcam.com/learn/v-carve-a-house-number-plaque/) · [Set work zero with a touch plate](https://carvcam.com/learn/set-work-zero-with-a-touch-plate/) · [Recover from an alarm](https://carvcam.com/learn/recover-from-a-cnc-alarm/) · [Make 6 name tags in one job](https://carvcam.com/learn/make-name-tags-on-a-cnc/) · [Cut a V-carve inlay coaster](https://carvcam.com/learn/cut-a-v-carve-inlay-coaster/) · [Install CarvCAM on a Mac](https://carvcam.com/learn/install-carvcam-on-a-mac/)

## From blank board to finished sign.
One app for your LongMill or AltMill.

[Download for Windows](https://carvcam.com/download/windows)
[Use online](https://app.carvcam.com/)
Windows 10 and 11 · [Mac](https://carvcam.com/download/) · [Linux](https://carvcam.com/download/linux-appimage) · [Raspberry Pi](https://carvcam.com/download/raspberry-pi-deb) · Works offline · [All downloads](https://carvcam.com/download/) · [See how it works](https://carvcam.com/)
