# Every Sienci Labs Bit, with Feeds for Your LongMill or AltMill | CarvCAM

> CarvCAM knows every bit in Sienci's eight sets: diameter, flutes, which set it comes in, whether it fits your collet, and official or estimated feeds for your machine and router.

Source: https://carvcam.com/features/sienci-bit-library/

Feature

# Every Sienci Labs Bit, with Feeds for Your LongMill or AltMill

No tool database to type in. CarvCAM ships with the Sienci Labs bit catalog: tick the sets you own and every job uses those bits with the right numbers.

[Download for Windows](https://carvcam.com/download/windows)
[Use online](https://app.carvcam.com/)
Windows 10 and 11 · [Mac](https://carvcam.com/download/) · [Linux](https://carvcam.com/download/linux-appimage) · [Raspberry Pi](https://carvcam.com/download/raspberry-pi-deb) · Works offline · [All downloads](https://carvcam.com/download/) · [See how it works](https://carvcam.com/)

[Image: Sienci bit library in CarvCAM]

What it does
### Your Sienci bits, already set up

- All eight Sienci sets, from the Starter End Mill Set to the AltMill Chamfer Set
- I have this set adds a whole set to My bits in one click
- Filter by use (engrave, relief, cut out, plastic, surface) and see the feeds for soft wood, hardwood, plastics or aluminum
- Each card says if the bit fits your router or spindle, or needs the 1/8″ collet
- Official Sienci feeds where Sienci publishes them; Estimated, from the same table, everywhere else
- Links to each bit's page at Sienci Labs

Works on
### Your Sienci machine
[LongMill MK3](https://carvcam.com/machines/longmill-mk3/) · [AltMill](https://carvcam.com/machines/altmill/) · [LongMill MK2](https://carvcam.com/machines/longmill-mk2/)

More features
## Part of one workflow

[### No post-processor “What is a post processor?” is one of the most asked questions on the Sienci forum. In CarvCAM you never need to know: there is nothing to pick, and the file is checked before it reaches the machine. Learn more](https://carvcam.com/features/no-post-processor/)[### V-carving V-carving is what makes a sign look professionally cut: deep where the letter is wide, sharp in the corners. CarvCAM does it from the same text you typed. Learn more](https://carvcam.com/features/v-carve/)[### Sign design Design where you carve. The preview shows the wood already cut, so what you see is what comes off the machine. Learn more](https://carvcam.com/features/sign-design/)

## From blank board to finished sign.
One app for your LongMill or AltMill.

[Download for Windows](https://carvcam.com/download/windows)
[Use online](https://app.carvcam.com/)
Windows 10 and 11 · [Mac](https://carvcam.com/download/) · [Linux](https://carvcam.com/download/linux-appimage) · [Raspberry Pi](https://carvcam.com/download/raspberry-pi-deb) · Works offline · [All downloads](https://carvcam.com/download/) · [See how it works](https://carvcam.com/)
