# Set up your workshop | CarvCAM Docs

> Tell CarvCAM which LongMill or AltMill you have, what spins the bit and which Sienci bits you own, so it sets speeds and depths for your setup. Then pick a first cut.

Source: https://carvcam.com/docs/workshop/

Get started

# Set up your workshop

The first time you open CarvCAM, three short screens ask what you have. CarvCAM uses the answers to set speeds, depths and suggestions for your exact setup.

3 steps

### 1. Pick your machine
Each card shows the work area, Z height and specs. Click yours: LongMill MK3, LongMill MK2 or AltMill, in the size you own.

[Image: Pick your machine in CarvCAM]

### 2. Pick what spins the bit
AutoSpin T1, Makita RT0701C or a spindle kit. CarvCAM shows the speed range, how speed is controlled and the collets.

[Image: Pick what spins the bit in CarvCAM]

### 3. Tick the bits you own
Tick the bits you have, or pick the Sienci set you bought to add all its bits at once. CarvCAM only suggests projects and cuts that use bits you have.

[Image: Tick the bits you own in CarvCAM]

## First cuts

After setup, **First cuts** lists projects made for your machine and bits, from a depth test on scrap MDF to a raised door sign. Each one says what you learn by making it. Two show newer tools: **Name tags ×6** ([Make copies](https://carvcam.com/docs/copies/)) and **Heart inlay coaster** ([V-carve inlay](https://carvcam.com/docs/inlay/), free to cut).

[Image: First cuts: projects ready for your machine and bits.]

First cuts: projects ready for your machine and bits.

## Change it later

The menu at the top left opens **First cuts**, **My projects**, **My bits** and **Settings**. Change what spins the bit in **Settings › My machine** ([Settings](https://carvcam.com/docs/settings/)). Add or remove bits any time in **My bits** ([Bits and feeds](https://carvcam.com/docs/bits-and-feeds/)).

Own more than one machine? Click **Change machine** in Settings to add another, then switch from the machine name in the top bar.

[**How CarvCAM works** The four steps and how the parts connect.](https://carvcam.com/docs/how-it-works/)[**Quickstart** Carve your first sign.](https://carvcam.com/docs/quickstart/)
