# Settings | CarvCAM Docs

> What's in CarvCAM's Settings › My machine: what spins the bit, the machine profile, touch panel mode for the gControl and your CarvCAM account.

Source: https://carvcam.com/docs/settings/

Get started

# Settings

Open the menu at the top left and choose **Settings**. Everything about your machine and how CarvCAM talks to the world is on one page.

[Image: Settings › My machine.]

Settings › My machine.

| Setting | What it does |
| --- | --- |
| My machine | Your machine card, its travel and max speed. CarvCAM checks every project against this travel |
| What spins the bit | Switch between the router or spindle your machine supports. Feeds and the Makita dial follow |
| Touch panel mode (gControl) | **Automatic**, **Always on** or **Off**. See below |
| CarvCAM account | Sign in or out, and see your plan. See [Account and Pro](https://carvcam.com/docs/account-and-pro/) |
| Change machine | Add another machine, or change this one. **Remove this machine** appears when you have more than one |

## Touch panel mode

For a touch screen next to the machine, like Sienci's gControl: bigger buttons, a lighter preview for the gControl's processor, and a **Full screen** button in the top bar. **Automatic** turns it on when the main screen is a touch screen. The layout fits a 1280 × 720 screen.

> **Tip: Small windows and phones.** On a narrow window the panel moves below the board as a sheet you can pull up, so CarvCAM stays usable on a small laptop or tablet.

[**Set up your workshop** Machine, router and bits.](https://carvcam.com/docs/workshop/)[**Account and Pro** Sign in and what Pro adds.](https://carvcam.com/docs/account-and-pro/)
