# My projects | CarvCAM Docs

> My projects in CarvCAM: every project saves by itself as a draft and is marked carved when a carve finishes. Continue where you left off, duplicate, delete, and the Free plan limit.

Source: https://carvcam.com/docs/projects/

Design

# My projects

You never have to save: a project lands in **My projects** as a **Draft** as soon as there is something on the board, saves on every change and step, and is marked **Carved** when a carve finishes.

## Save, new and clear

| Button (next to the design name) | What it does |
| --- | --- |
| Saved check (or Ctrl+S) | Shows the project is saved. Ctrl+S saves right away |
| **New project** | Starts a blank board. Pick the wood and add text or shapes |
| **Clear the board** | Removes everything from this board. Ctrl+Z brings it back |
| **My projects** | Opens the list |

## The list

Open it from the menu at the top left › **My projects**. Each card shows **Draft** or **Carved**, the board size, material, the step you were on and when it was saved. **Continue at Prepare** (or Position) reopens a draft where you left it; a carve always restarts at Position so you set zero again. The Free plan keeps **3 projects**; Pro keeps all of them.

[Image: My projects: open, duplicate or delete.]

My projects: open, duplicate or delete.

| Button | What it does |
| --- | --- |
| **Open** / **Continue at…** | Opens the project, at the step you were on |
| **Duplicate** | Makes a copy, to try a variation without touching the original |
| Delete (bin icon) | Removes it from My projects for good. G-code files you downloaded aren't affected |

> **Note: Where projects live.** Projects are kept on this computer, inside CarvCAM. They don't sync to other computers. If storage is full, CarvCAM says so: delete old projects or remove a large tracing image.
