# Cut styles | CarvCAM Docs

> Raised, Engraved, V-carve, Cut through and Part with holding tabs: what each CarvCAM cut style does, when to use it, and how hatch fill and holding tabs work.

Source: https://carvcam.com/docs/cut-styles/

Design

# Cut styles

Every item on the board gets a style. Pick it in the item's options under **Style**.

| Style | What it does | Use it for |
| --- | --- | --- |
| Raised | Lowers the background around the item so it stands up | Bold names and logos |
| Engraved | Cuts the item down into the board with a flat bottom | Most text and icons |
| Engraved with a V-bit (V-carve) | When the bit in **Wood & bit** is a V-bit, Engraved becomes a V-carve: sharp corners, depth follows the width | Classic signs, fine serif letters |
| Cut through | Cuts all the way through along the inside of the shape, leaving a hole | Stencils, hanging holes |
| Part | Cuts the item out along its outside, with holding tabs, as a loose piece | Coasters, tags, ornaments, several parts on one board |

With **Cut-out lettering** chosen in **Shape**, every element is cut all the way through.

## Depth

Each style has a **Depth** in millimeters. With a V-bit it reads **Max depth (V-carve)**: the bit goes deeper where lines are wider, up to that limit. CarvCAM splits deep cuts into passes your bit can handle, based on the material.

## Outline, fill and combine

Open **Outline, fill & combine** under an item for more:

| Option | What it does |
| --- | --- |
| Thicker / thinner | Grows or shrinks the shape |
| Outline ring | Adds a ring around the shape, with its own gap and width |
| Engraving fill | **Solid**, or **Outline + lines** for a hatched texture, with line spacing and angle |
| Combine with others | **Normal**, **Subtract** (cuts this shape out of others) or **Mask** (keeps only what's inside) |

## Holding tabs

A Part or the sign's own outline leaves small bridges of wood so the piece doesn't move at the end. They show in amber on the board. Set how many and how tall in **Prepare › Holding tabs**. Switch **Tab placement** to **Manual** to drag them on the preview, or click the outline to add one; select a tab and press Delete to remove it. You saw them off after carving.

> **Tip: Which bit?.** Raised, Engraved, Cut through and Part work with a 1/8″ flat end mill. V-carving needs a V-bit, such as the 60° V-bit.
